Current Rating


Pin Configuration

IP Rating

Cable type


Cable Diameter

Generator Tails

Country of Origin

H07RN-F Powerlock Rubber Ext Cables

Veam ITT Cannon compatible Powersafe Powerlock Ext Cables assembled using Powersafe 400Amp or 800Amp connectors L1, L2, L3, Neutral-Blue & Earth-Green ( EU Colours) Full Sets or Individual cables on single core Nexans Lineax or Titanex H07RN-F rubbber cable. Available in different lengths and core sizes, cross-sectional area (CSA). Powerlock cables are availble made to order to your chosen length, standard core sizes 35mm², 50mm², 70mm², 95mm²,120mm²,150mm², 185mm², 240mm² & 300mm² sets of 5 or 4 ( no Neutral ) Cables made to order. Powerlock Generator Tails (adapters) also available, Lug to Source or Lug to Drain, in varaious lengths. Veam ITT Powerlock are available in four standard formats which allow complete hook up through the standard daisy chain principle. There are two Source connectors, one for panel mounting and one for cable attachment. These are identified as Panel Source and Line Source. The other two types are Drain connectors. These connectors are identified as Panel Drain and Line Drain. In an emergency power application, the generator is the source and would be fitted with Panel Source (panel-mount) connectors. Typically a cable assembly is required to connect between the generator (source) and the item receiving the power (drain). This will usually have a drain connector on one end a source connector on the other


|< < 
1 of 4
 > >|