Product weight: kg
PowerBOX 400Amp 3pH+N+E 400V set of Powerlocks on case rack 19” 15U p/n PBF400P15U. MCCB 250Amp 4p 25kA (MAIN OUT) + 1 shunt release + 1 panic button.
- Professional standard 19" rack case, 15U height, made of 10mm thick plywood with black scratch-resistant outer foil.
- 2 front / rear covers.
- 8 handles with rubber grips
- 8 butterfly closures
- 8 rounded corners
- 4 wheels Ø 100 mm in rubber (2 with brake) mounted on skate.
- 2 component-holder panels (front/rear) in PVC-CAW black color 10mm thickness (V0-UL 94) with sealing gaskets.
- Dimensions: W535 x H865 x D820cm. about (included lids).
- Weight: 70kg. (equipped).
REAR (incoming & outgoing):
5 x Powelock SYNTAX® 400Amp “L1-L2-L3-N-E” 400V IP67 panel drain (IN).
5 x Powerlock SYNTAX® 400Amp “L1-L2-L3-N-E” 400V IP67 panel source (LOOP) with dust caps IP53.
6 x C-FORM 16Amp 1pH+N+E 6h 230V IP44 panel socket bk (OUT CEE 16/3).
2 x BS 13Amp 1pH+N+E 230V IP44 panel socket bk (OUT SERVICE).
3 x C-FORM 32Amp 3pH+N+E 6h 400V IP44 panel socket bk (OUT CEE 32/5).
1 x C-FORM 125Amp 3pH+N+E 6h 400V IP67 panel socket bk (OUT CEE 125/5).
- FRONT (protection devices & instrumentation):
- 1 analogic voltmeter +
- 1 voltmeter selector switch +
- 1 modular three-phase led red color (F1 / fuse switch 3pN 10,3x38mm.; control IN voltage).
- 1 MCCB 250Amp 4p 25kA (MAIN OUT) + 1 shunt release + 1 panic button.
- 1 LCD multimeter 96x96mm. (F2 / fuse switch 3pN 10,3x38mm.).
- 6 x RCBO 16Amp 1pN-C 6.000A IΔn 0,03A AC type (6 x C-FORM 16amp single-phase).
- 1 x RCBO 10Amp 1pN-C 6.000A IΔn 0,03A AC type (2 x BS 13amp).
- 3 x MCB 32Amp 4p-C 6.000A with electronic earth leakage earth leakage Idn/time delay adjustable & bypass (3 x C-FORM 32amp three-phase).
- 1 MCB 125Amp 4p-C 10.000A with electronic earth leakage earth leakage Idn/time delay adjustable & bypass (1 C-FORM 125amp three-phase)
Nominal data: IEC 61439-1 & 2, Ue: 400V 3pH+N+E, fn: 50Hz, InA: 400amp, Icc: 6.000A, RDF: 61%, IP: 44, Insulation class: I.
CE DECLARATION OF CONFORMITY
LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES IN COMPLIANCE
WITH THE STANDARD IEC 61439-1/2 (EN 61439-1/2)
The CE marking is required for many products. It:
· shows that the manufacturer has checked that these products meet EU safety, health or environmental requirements
· is an indicator of a product’s compliance with EU legislation
· allows the free movement of products within the European market
Available in many differennt configurations, built to your individual specifications. Call us to build yours.