Powersafe Microswitch Lead Connector MSPC-3S Assy 5 Metre in length

An M12 sensor cable with a with a right angled connection and a partially stripped unterminated end for the creation of bespoke cable assemblies. M12 connector cable assemblies are commonly used in sensor and automation equipment. Boasting a high degree of environmental protection, they are ideal for industrial use.

The M12 actuator cable is fitted with a PUR sheath and is rated to IP67 for protection from dust and water. Featuring Gold plated contacts for excellent conductivity, secured with a Nickel plated Brass coupling ring and suitable for temperatures ranging from -25 to +75°C.

A hardwearing cable suitable for industrial use and ideal for when secure and reliable data transfer is needed.

3 Core M12 sensor cable assembly

4 Way

Un-terminated and partially stripped end

Insulation Resistance 100 MΩ

Wide operating temperature range of -25 to 75°C

PUR sheath

Neoprene O-Ring

Nickel plated Brass coupling nut

IP67 rated

Supporting info: Powersafe Microswitch Lead Connector MSPC-3S Assy

Some users attach a data cable from a generator to the 3 pin connector in the back of the Sequestial box. This is something setup on the generator side so the generator can’t be made live until all connectors are attached and the final locking switch is in the locked position (meaning the connectors can’t be accidentally disconnected). There’s a leaver inside the box that activates the microswitch when in the locked position, letting a signal be sent back to the generator, allowing the operator to turn it on (make live). Using the data cable also means the red LED will light up showing the box is on / live.